There may be a strange glitch with the pump station, or more specifically, a pump station to a pump station. There is no water where I am building Alpha-Beta Base, and so I have run water from a bunch of wells through a pump station on the water site to a large horizontal tank on my base, and then into the water port on my Workshop. Everything has worked fine. However, I recently added a second well site, built a well on it, and ran a long line from it to a second horizontal tank on my base. To hook the 2 tanks together, I built a 2nd pump station, this one on my base, and then ran that into the water port on my workshop. That messed everything up, as from then on, I had no water for my bathroom sink, or even to a Workshop sink I built to test the glitch. I tried running a 2nd output from the pump station to the port on my hanger, and that didn't work. I tried eliminating the pump all together, and simply running one tank to the port on my Workshop and 1 tank to the port on my hanger, and that didn't work, even though the line from the first tank to the input on my workshop was exactly like it was originally before I built the pump. It is as if as soon as I connected the 2 lines to the pump, and then the pump into the workshop, something glitched, and my base was no longer able to support water to my sinks. I reloaded my previous save, left the original line into the workshop alone, and ran the 2nd line into the 2nd tank, and then into the hanger, without ever using a pump to connect the 2 tanks together, and everything works fine. There may be some kind of a glitch that is initiated when a pump is used to connect 2 water lines together, at least if 1 line comes from a pump already. Note that I changed the pump settings to allow more than enough water to flow into the workshop. Also note that my plants never failed to have enough water - only my sinks were affected (and maybe the shower?)

Bug

Ok

0.0334103

Yes

0.184.3