Hello, I have encountered a problem with oxygen distribution in the Pumping Station. My setup is built on a steel platform and consists of a well connected to a Sabatier reactor and the network storage tanks, which are then connected to a Pumping Station and an Workshop module. The water and methane networks work correctly: Water: 6.00 L/h network production, 423.46 L stored, 100% efficiency. Methane: 2.00 L/h network production, 252.09 L stored, 100% efficiency. Oxygen is also being produced correctly: Oxygen: 20.00 L/h network production, 100% efficiency. However, the problem occurs at the Pumping Station. The oxygen output shows: Available: 0.00 L Distribution: 20.00 L/h Required: 0.00 L/h Supplied: 0.00 L/h The output is therefore distributing 20.00 L/h of oxygen even though the connected module requires 0.00 L/h and receives 0.00 L/h. This causes my oxygen storage to be emptied/consumed even though there is no actual oxygen demand. For comparison, the water output works correctly: it distributes 4.80 L/h, with 4.80 L/h required and 4.80 L/h supplied. This makes the oxygen behavior appear to be a calculation or distribution bug in the Pumping Station. The distribution value should act as a maximum limit. If the connected module requires 0 L/h, the actual oxygen distribution should also be 0 L/h, rather than consuming the available oxygen. I have attached screenshots showing the network production and the Pumping Station values. Thank you for investigating this issue.

Bug

Ok

0.0333354

Yes

1.2.0